View T5630B_4820682.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Active Single channel Analog signal
Isolation barrier (Vin & Vout)
T55/56/65/66_B
APPLICATIONS
Analog signal isolating barrier, is a signal conditioner with electrical insulation between input and output, which can receive the standard or non-standard analog signal input from the scene, and transmit a standard output signal to the control room or DCS, to get three-port isolated among power supply, input and output. It is designed for translating signals of apparatus in hazardous area, isolating and transforming these signals into standard signals which can be accepted by industry computer, DCS, PLC, or user-specified special signals. It is widely used in the industrial measurement systems, medical electronic equipment, electrical equipment etc. We adopt high efficiency magnetism and electricity isolated technology to achieve signal isolation, with characteristics of high output accuracy, good linearity and low temperature drift. Input Data Isolation Power Output Data Power Supply Data
PRODUCT PROGRAM
Part Number T6630B T5630B T5533B T5530B Power Supply 24V 24V 24V 24V Input 0-5V 0-10V 0-10V 0-10V Output 0-5V 0-5V 0-10V 0-10V Isolation Channels Power Output NONE NONE 24V NONE 1 1 1 1
Note: We could also offer customer design for special input and output.
ELECTRICAL CHARACTERISTICS
Power Supply Power Dissipation Power Protection Output Voltage Output Current Input Signal Input Impedance Overload (Nominal Power Supply)5% 2W Reverse protection (Nominal)10% 25mA See above 10M 15V See above 1K(At Output = MAX)
FEATURES
Three port Isolation(input, output, power supply) High accuracy (0.1% F.S.) High linearity (0.1% F.S.) Isolation voltage(2500VDC/60S) High frequency response(15KHz) Low temperature drift(35PPM/) Industry class(Operation temp.: -25 to +71) High reliability(MTBF500,000 hours)
Output Data
Output Signal Load
TRANSMISSION CHARACTERISTICS
Offset Gain Error Temperature Drift 0.1%F.S. 0.1%F.S. 0.0035%F.S./ (-25 to +71)
ISOLATION CHARACTERISTICS
Galvanic Isolation Isolation Voltage Three port Isolation(input, output, power supply) 2.5KVDC (Tested for 1minute and 1mA max, humidity < 70%) 100M 500VDC(Among signal input ,signal output, power supply and isolation power output)
MODEL SELECTION
TXXXXB
Package style Isolation power output Power supply Output Input Isolation amplifier
Insulation Resistance
OTHER CHARACTERISTICS
Ambient temperature Package Safety Class EMC compliance Operation temperature:-25 to +71 Transport and Storage temperature:-50 to +105 35mm DIN-rail package IP20(IEC60529 / EN60529) GB/T 18268(IEC61326-1) About 60g No dusts, gases of fiercely vibration, impulsion or gases that may erode to the components surrounded
MORNSUN Science & Technology co.,Ltd.
Address: 2th floor 6th building, Huangzhou Industrial District, Guangzhou, China Tel: 86-20-38601850 Fax:86-20-38601272 Http://www.mornsun-power.com
Weight Application environm ent
Note: 1 .All specifications measured at TA=25C, humidity<75%, nominal input voltage and rated output load unless otherwise specified. 2. Only typical models listed, specifications of custom product may be different. Please contact our service people directly for certain conditions.
The copyright and authority for the interpretation of the products are reserved by Mornsun
Specifications subject to change without notice. T55/56/65/66_B A/1-2008 Page 1 of 2
SINGLE CHANNEL SCHEMATIC DIAGRAM
2+ Power supply 1 8+ Isolation power output 76+ Input 54+ Output 3-
CONNECTION
1. Cross section area of wiring: 0.5mm -2.5 mm ; 2. Multi-strand wire, the length of bare wire is about 8mm, fixed by the M4 bolt.
2 2
Application Note
1. Please read the user manual carefully before
APPLICATION CIRCUIT DIAGRAM
5(-) 1(-)
using. If any questions please contact our technical support department. 2. Please do not use this product in hazardous area.
Power supply
Input
6(+) 2(+)
3. The power supply of this product should be DC power source. It is forbidden to use 220VAC power supply. 4. To avoid equipment invalidation, or any failure,
7(-)
3(-)
Isolation power output
8(+) 4(+)
Output
users' disassembling this product is forbidden.
AFTER SERVICE
PACKAGING SIZE AND TERMINAL DESCRIPTION
1 2 3 98 94.5
MORNSUN
1. Products they
are
carefully
inspected or
and
controlled before going out from our factory. If
Power supplyPower supply+ OutputOutput+ InputInput+ Isolation power output-
operated abnormally
there were
anything wrong in the inner parts, please contact with our agents near you or technical support in our company as soon as possible. 2. 3 years warranty since the delivery date. During the period of quality guaranteeour company will repair or change free of charge if product has any quality problem in the process of normally using.
4 5 6 7
8 Isolation power output+ 25 41
Unit: mm
Tolerance:0.5
INSTALLATION
DIN35mm standard rail installation 1. Upside of the instrument card in the rail; 2. Push underside of the instrument into the rail.
DISASSEMBLY
1. Use a screwdriver (Width of edge6mm), cut in the metal card lock from the underside; 2. Boost up the screwdriver and prize the metal card lock downwards; 3. Pull the instrument out of the rail.
1
3
2
1 2
The copyright and authority for the interpretation of the products are reserved by Mornsun
Specifications subject to change without notice. T55/56/65/66_B A/1-2008 Page 2 of 2

▲Up To Search▲

Price & Availability of T5630B

	To Download T5630B Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .